Showing 13–24 of 27 results
-
CairnOptoMask OC-LS
Large aperture adjustable field mask improves time resolution with frame transfer cameras
- C-mount to C-mount device with precise aperture control
- Enables any size region to be selected, centered on the chip
(0 reviews) -
CairnOptoMask LS
Large aperture adjustable field mask improves time resolution with frame transfer cameras
- C-mount to C-mount device with precise aperture control
- Enables any arbitrary region to be selected
(0 reviews) -
CairnOptoLED
Ultra-stable, high-intensity, modular illuminator
- High intensity
- Near perfect stability
- Instantaneous vibration-free switching
- Well-suited for epi-fluorescence, transmitted light microscopy, macroscopy, and optogenetics
(0 reviews) -
CairnOptoSpin25 High Speed Filter Wheel
Compact filter wheel with high-speed stepping or continuous spin mode
- Excellent for high-speed applications with minimal vibration
- Continuous spin mode for a wide range of speeds
- Small form-factor permits multiple units to be used in tandem for faster switching times
(0 reviews) -
CairnEmissions Infinity Port
The Cairn Emission Infinity port is a simple 1x relay device providing up to 200mm of infinity space to insert filter wheels or other devices for which the angle of incoming light is important. Features include:
• Broad wavelength range (425-875nm)
• Supports 18.8mm diagonal sensors
• Magnification options on request(0 reviews) -
CairnEmpty 3-Channel Filter Cube for OptoSplit III – Cairn Accessory>> Learn More
- Uses 2- 25.5 x 36 mm dichroic mirrors and 25 mm emission filters.
- Dichroics are user exchangeable.
- 2 mm laser dichroics recommended.
- Part #: P290/000/300
(0 reviews) -
CairnEmpty Filter Cube for OptoSplit II, TwinCam and OptoSplit III (2-Channel Mode) (Dovetail-less) – Cairn Accessory>> Learn More
- Uses 25.5 x 36 mm dichroic mirror and 25 mm emission filters.
- Dichroics are user exchangeable.
- 2mm laser dichroics recommended Dovetail-less Mount.
- Part #: P290/000/250
(0 reviews) -
CairnEmpty Filter Cube for OptoSplit II Bypass, TwinCam and OptoSplit III (2-Channel Mode) – Cairn Accessory>> Learn More
- Uses 25.5 x 36 mm dichroic mirror and 25 mm emission filters.
- Dichroics are user exchangeable.
- 2mm laser dichroics recommended With Dovetail Mount
- Part #: P290/000/200
(0 reviews) -
CairnopenFrame
An open source microscopy hardware platform that aims to enable modular, upgradeable and easily maintained microscope systems to be assembled rapidly using a core modular microscope frame with add-on modules such as excitation couplers or illuminators and camera systems that can be implemented using widely available commercial components and systems.
(0 reviews) -
CairnMultiSplit V2
The MultiSplit V2 fourway splitter allows applications where there is a requirement for simultaneous, or high speed, acquisition of multiple emission bands or polarization states. The simultaneous acquisition of these images offers a major benefit over manual or electronic filter changers, as there is no need to pause acquisition while the filter position is changed. This allows your camera to be operated in a fast streaming mode.
• Four-way emission image splitter• 4 images on a single camera chip• Large sensor sCMOS format(0 reviews) -
CairnTriLine LaserBank
Modular and affordable laser launch for the biosciences
- Now supporting high-power, multimode lasers
- Well-suited for TIRF, spinning disk confocal, FRAP, and optogenetics
- Supports three solid-state lasers
- Provides the convenience of a customizable, turn-key system at less than half the cost of similar products
(0 reviews)
