Specifications

PhotoFluor II

Physical Characteristics
Width	5.5in
Height	8.5in
Depth	14.5in
Weight	16.6lbs
Operating Mode	Continuous
Water Protection	IPX0
Main Cable	10A/250V; Jack IEC 320/C13
Power Supply	100–240V, 50/60Hz, 3.15A; Remote On/Off ‘SOFT OFF’ button on keypad deactivates lamp to save power and bulb life. Electronics remain in low power standby mode.
Fuse	T3.15A 250V
Keypad	Five button control
Liquid Light Guide	5mm core x 2m (6.5ft) length 3mm core x 2m (6.5ft) length
Lamp
Type	200W metal halide
Output	Approximately 20W with 5mm core, 12W with 3mm core
5-Position Filter Wheel
Mode	Motorized operation
Contents	Attenuation screens, can accept heat tolerant excitation filters
Motorized Shutter	Approximately 250ms response time
Ambient Conditions for Operation
Temperature	10° to 25°C (50° to 77°F)
Relative Humidity	30% to 75%
Air Pressure	700hPa to 1060hPa
Display and Safety Features
Display and Safety Features	Clear display of lamp time, filter wheel position
	Automatic system diagnostics
	Resettable lamp counter with warnings
	Four line by 20 character display (dimmable)
	Safety interlocks, output light blocked in absence of light guide
	Overtemperature protection with software warnings and hardware shutdown
Compliance	ETL and CE/CSA compliant
Serial Connection
Serial Control	Computer interface with provided or easily customized software via binary or ASCII commands. User adjusted contrast, volume, filter wheel position names. User controlled filter position.

DOWNLOADS