| Physical Characteristics |
| Width |
5.5in |
| Height |
8.5in |
| Depth |
14.5in |
| Weight |
16.6lbs |
| Operating Mode |
Continuous |
| Water Protection |
IPX0 |
| Main Cable |
10A/250V; Jack IEC 320/C13 |
| Power Supply |
100–240V, 50/60Hz, 3.15A; Remote On/Off
‘SOFT OFF’ button on keypad deactivates lamp to save power and bulb life.
Electronics remain in low power standby mode. |
| Fuse |
T3.15A 250V |
| Keypad |
Five button control |
| Liquid Light Guide |
5mm core x 2m (6.5ft) length
3mm core x 2m (6.5ft) length |
Lamp |
| Type |
200W metal halide |
| Output |
Approx. 20W with 5mm core,
12W with 3mm core |
5-Position Filter Wheel |
| Mode |
Motorized operation |
| Contents |
Attenuation screens, can accept heat tolerant excitation filters |
| Motorized Shutter |
Approx 250ms response time |
Ambient Conditions for Operation |
| Temperature |
10° to 25°C (50° to 77°F) |
| Relative Humidity |
30% to 75% |
| Air Pressure |
700hPa to 1060hPa |
Display and Safety Features |
| Display and Safety Features |
Clear display of lamp time, filter wheel position |
| |
Automatic system diagnostics |
| |
Resettable lamp counter with warnings |
| |
Four line by 20 character display (dimmable) |
| |
Safety interlocks, output light blocked in absence of light guide |
| |
Overtemperature protection with software warnings and hardware shutdown |
| Compliance |
ETL and CE/CSA compliant |
Serial Connection |
| Serial Control |
Computer interface with provided or easily
customized software via binary or ASCII commands.
User adjusted contrast, volume, filter wheel position names.
User controlled filter position. |
DOWNLOADS
